Vibratory rammer SRV 590

The vibrating rammer SRV 590 - strong and leightweight.

Its low weight (136 lbs / 62 kg) makes the rammer easier to transport and handle during work on the construction site. Despite the low weight of the SRV 590, you can still rely on its robust design.

Ten points for the SRV 590:

  1. Thanks to good operating comfort and low hand/arm vibrations the operator can work for a long period of time.
  2. Rugged and powerful tamping system.
  3. Four-stroke gasoline engines GXR 120 from Honda with low emissions.
  4. During start-up an oil sensor monitors the oil pressure and prevents the engine from starting, if there is lack of oil.
  5. Effective multi-stage air filtration system with cyclone pre-cleaner protects the engine against harmful contaminants.
  6. Tank and inline filters clean the fuel.
  7. A notched throttle control lever with settings for operating speed, reduced speed, running idle and engine stop / fuel shut-off.
  8. Maintenance-free ramming foot.
  9. Easy transport thanks to carrying handles and rolls.
  10. Hour meter is standard.

Two years warranty without restrictions.

TECHNICAL DATA

SRV 590

Operating weight:

62 kg

Shoe width:

28 cm (20 cm*)

Percussion rate:

700 1/min.

Engine:

Honda GXR 120
(4-stroke gasoline)

Engine output, max.:

2.7 kW (3.7 HP)

* Available with a rammer foot width of 20 cm.

Available optional extras:
Wheel kit.

>> Vibrating rammer SRV (YouTube)
>> Operating and maintenance (YouTube)